Epson PowerLite Home Cinema 2040 User Manual - Page 134
Solutions to Sound Problems, Related references, Related tasks, A/V Mute, Source, Audio Out
View all Epson PowerLite Home Cinema 2040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Related references Projector Feature Settings - Settings Menu 3D Viewing Range Optional Equipment and Replacement Parts Related tasks Cleaning the 3D Glasses Charging the 3D Glasses Pairing the 3D Glasses with the Projector Solutions to Sound Problems If there is no sound when you expect it or the volume is too low or high, try the following solutions: • Adjust the projector's volume settings. • Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped. • Press the Source button on the projector or a source button on the remote control to switch to the correct input source, if necessary. • Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source. • Check the audio cable connections between the projector and your video source. • If you do not hear sound from an HDMI source, set the connected device to PCM output. • Make sure any connected audio cables are labeled "No Resistance". • If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port. If not, you need to connect an audio cable. • If you connected an audio device to the projector's Audio Out port, the internal speaker is disabled. However, you can still control the volume level via the projector's control panel or remote control. • If you turn the projector on immediately after turning it off, the cooling fans may run at high speed momentarily and cause an unexpected noise. This is normal. Parent topic: Solving Image or Sound Problems Related concepts Projector Connections Related tasks Controlling the Volume with the Volume Buttons 134