Epson PowerLite Pro G5750WU User's Guide - Message Broadcasting - Page 9
Solving Problems
View all Epson PowerLite Pro G5750WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Solving Problems If messages fail to display on the selected projectors, check the following: ■ If the message does not appear on any of the projectors, check the firewall settings on the computer running EasyMP Monitor. Make sure EasyMP Monitor is selected as an exception. ■ If an individual projector fails to display the message, make sure the Standby Mode setting in the projector's Extended menu is set to Communication On. ■ Try restarting the projector. If a projector user or presenter has pressed the Esc button to stop the message broadcast, the projector will not receive messages until it is restarted. © 2010 Epson America, Inc. 1/10 CPD-27543R1 Message Broadcasting 9
Message Broadcasting
9
Solving Problems
If messages fail to display on the selected projectors, check the
following:
■
If the message does not appear on any of the projectors, check the
firewall settings on the computer running EasyMP Monitor.
Make sure EasyMP Monitor is selected as an exception.
■
If an individual projector fails to display the message, make sure
the
Standby Mode
setting in the projector’s Extended menu is
set to
Communication On
.
■
Try restarting the projector. If a projector user or presenter has
pressed the
Esc
button to stop the message broadcast, the
projector will not receive messages until it is restarted.
© 2010 Epson America, Inc. 1/10
CPD-27543R1