Epson RX-80 User Manual - Page 95
ESC G, Double-strike Mode, Format, Comments, ESC S O, Select Superscript Mode, Select, Command Summary
View all Epson RX-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
ESC G Select Double-strike Mode Format: ASCII code: Decimal: Hexadecimal: ESC G 27 71 1B 47 Comments: Makes text bolder by printing each line twice, with the second printing slightly below the first. In NLQ the mode is not available but is not cancelled. ESC H Cancel Double-strike Mode Format: ASCII code: ESC H Decimal: 27 72 Hexadecimal: 1 B 48 Comments: Turns off the double-strike mode selected by ESC G. ESC S O Select Superscript Mode Format: ASCII code: Decimal: Hexadecimal: ESC S 27 83 1B 53 NUL 0 00 Comments: Prints characters about two-thirds of the normal height in the upper part of the character space. The ASCII code 0 or the character "0" can be used in this command. It is cancelled with ESC T. A-24 Command Summary
ESC G
Select
Double-strike Mode
Format:
ASCII code:
ESC
G
Decimal:
27
71
Hexadecimal:
1B
47
Comments:
Makes text bolder by printing each line twice, with the second
printing slightly below the first. In
NLQ
the mode is not available
but is not cancelled.
ESC H
Cancel Double-strike Mode
Format:
ASCII code:
ESC
H
Decimal:
27
72
Hexadecimal:
1B
48
Comments:
Turns off the double-strike mode selected by ESC G.
ESC S O
Select Superscript Mode
Format:
ASCII code:
ESC
S
NUL
Decimal:
27
83
0
Hexadecimal:
1B
53
00
Comments:
Prints characters about two-thirds of the normal height in the upper
part of the character space. The ASCII code 0 or the character “0”
can be used in this command. It is cancelled with ESC T.
A-24
Command Summary