Epson Stylus COLOR 740 Special Edition Product Information Guide - Page 12

EPSON Stylus COLOR 740 EPSON Photo Quality Ink Jet and Note Cards You can load up to 30 cards at a time. Always place the included support sheet under the cards and load them as shown below. Make sure you reverse your image before you print it- especially if it includes text-so it will read correctly when it's transferred. You can use the Flip Horizontal setting in your printer software to do this (see the Printer Basics book for instructions). After you print, follow the instructions that came with the paper to iron the image onto the shirt or other item. Make sure you set the paper thickness lever to the + position as shown in "Envelopes" on page 10. When you're ready to print, set the Media Type to Photo Quality Ink Jet Paper and the Paper Size setting to the card size in your printer software. EPSON Photo Stickers Use these sheets of stickers to print small, decorated photos for use on cards, invitations, or other items. You'll need to use an application that can create photo stickers, such as StickerPix.™ Load one sheet of Photo Stickers at a time. Make sure to place support sheets A and B that came with the stickers beneath the sheet. When you're ready to print, select Photo Quality Glossy Film as the Media Type setting and A6 Index card 105 × 148 mm as the Paper Size in your printer software. EPSON Photo Quality Self Adhesive Sheets Use these sheets to print labels or stickers. You can load one sheet at a time. Make sure your adhesive sheets are fully adhered to their backing sheet before you load them. When you're ready to print, select Photo Quality Ink Jet Paper as the Media Type setting in your printer software. EPSON Iron-On and Iron-On Cool Peel Transfer Paper You can print photos, company logos, or anything else you want on these transfer papers, and then iron your images onto T-shirts or other cloth items. Load one sheet of transfer paper at a time. For Iron-On Transfer Paper, select Ink Jet Transparencies as the Media Type setting. For Cool Peel Iron-On Transfer Paper, select 360 dpi Ink Jet Paper as the Media Type setting. Replacing an Ink Cartridge When the B black or A color ink out light flashes, the indicated cartridge is low on ink. This is a good time to make sure you have a new cartridge. When the light stays on, the cartridge is empty and you need to replace it. Use these EPSON ink cartridges within six months of installing them and before the expiration date on the package: Black ink cartridge: S020189 Color ink cartridge: S020191 Caution: To ensure good results, use genuine EPSON cartridges and do not refill them. Other products may cause damage to your printer not covered by EPSON's warranty. If you need to replace an ink cartridge before the lights flash (because the ink is too old, for example) follow the instructions in "Replacing an Outdated Ink Cartridge" on page 13. Removing and Installing Ink Cartridges You can replace a cartridge when the B black or A color ink out light is either flashing or on. (If you press the R cleaning button when both ink out lights are off, the printer cleans the print head, as described in "Cleaning the Print Head" on page 14.) Follow these steps: 1. Remove the new ink cartridge from its packaging. 2. Remove only the yellow part of the tape seal on top as shown below. Don't pull off the blue portion or try to remove the clear seal underneath the cartridge. Remove the yellow tape Black cartridge Color cartridge 12 - EPSON Stylus COLOR 740 7/98