Epson Stylus COLOR 740 Special Edition Product Information Guide - Page 5

EPSON Stylus COLOR 740 Environmental Temperature Humidity Operation: 50 to 95 °F (10 to 35 °C) Storage*: -4 to 104 °F (-20 to 40 °C) 1 month at 104 °F (40 °C) Transit*: -4 to 140 °F (-20 to 60 °C) 120 hours at 140 °F (60 °C) Operation: 20 to 80% RH Storage*: 5 to 85% RH (without condensation) * Stored in shipping container Safety Approvals Safety standards UL 1950, CSA 22.2 No. 950 EMC FCC part 15 subpart B class B DOS Support If driver support for the EPSON Stylus COLOR 740 is not available from your software manufacturer, you can use one of the other EPSON ESC/P 2 printer drivers (parallel port only). These drivers don't provide all the EPSON Stylus COLOR 740 features, such as 720 or 1440 dpi printing. Choose the first printer available from the following two lists: Black printing only t LQ-870/1170 t LQ-570(+)/1070(+) t SQ-870/1070 t LQ-850 t LQ-500 Color and black printing t EPSON Stylus PRO t EPSON Stylus COLOR 500 t EPSON Stylus COLOR II t LQ-860 t LQ-2550 Control Panel Settings You can change the following default settings from the printer's control panel: Setting Options Font Courier, Roman, Sans Serif, Prestige, Script, Roman T, Sans Serif H, Draft Character table Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1, PC 437 (U.S./Standard Europe), PC850 (Multilingual), PC860 (Portuguese), PC861 (Icelandic), PC863 (Canadian-French), PC865 (Nordic), Abicomp, BRASCII, Roman 8, ISO Latin 1 Follow these steps to change the settings listed above: 1. Make sure the printer is turned off and has paper loaded (at least 8.27 inches [210 mm] wide). 2. Hold down the R cleaning button and press the P power button. The printer prints instructions for changing settings and choosing a language for the instructions. 3. Press the E load/eject button to print a list of current settings (indicated with arrows) and additional instructions. 4. After you make the changes you want, turn the printer off to save the settings. The settings remain in effect until you change them again. Character Tables All character tables except Italic are the same as the PC437 table for hex codes 00 through 7F. Additional characters are available for hex codes 80 through FF. You can select the following character tables through the control panel or software commands: t PC437 (U.S./Standard Europe) t PC850 (Multilingual) t PC860 (Portuguese) t PC861 (Icelandic) t PC863 (Canadian-French) t PC865 (Nordic) t Abicomp t BRASCII t Roman 8 t ISO Latin 1 t Italic (no characters available for hex code 15) International character sets You can select a number of international character sets with the control panel or the ESC R command. Other sets can only be selected with the ESC R command. You can select additional characters with the ESC ( ^ command. 7/98 EPSON Stylus COLOR 740 - 5