Epson Stylus Photo 1270 Printer Basics - Page 40
shown in step 1., straight and not damaged. If necessary, trim the end again before reloading
View all Epson Stylus Photo 1270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5. Load the end of the paper into the printer as far as it will go, then slide the left edge guide against the paper. 4-inch wide roll paper 13-inch wide roll paper 6. Gently hold the paper in place on the top as you press and release the E load/eject button to feed the paper into the printer. 4-inch wide roll paper 13-inch wide roll paper (If the paper feeds incorrectly, pull it out backward and reload it. If it won't come out, hold down the E load/eject button for three seconds to feed the paper backward to where you can pull it out. Then reload it, making sure the end is straight and not damaged. If necessary, trim the end again before reloading as shown in step 1.) 7. Gently rotate the roll backward to remove any slack from the paper. 8. Make sure the output tray is open but the extensions are closed, and leave ample room at the front of the printer for your paper to eject smoothly. 9. Follow the steps in the next section to print on the roll paper. 35