Epson Stylus Pro 7890 Network Guide - Page 31

Register Network Interface Address to DNS Server, Acquire Host Name and Domain Name

Get Epson Stylus Pro 7890 PDF manuals and user guides View all Epson Stylus Pro 7890 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Note: ❏ The network administrator must check any changes made to the IP address settings. ❏ When Auto is selected, DHCP becomes available. A DHCP server/router must be available on your network. ❏ If Set Using Automatic Private IP Addressing (APIPA) is enabled, a private IP address is automatically assigned to the network interface even when there are no DHCP servers on your network. ❏ If the Dynamic DNS function is not supported, we recommend that you select Manual and then enter an IP address. This is because if you select Auto, the IP address of the network interface changes every time you turn on the printer so that you need to change the printer port setting accordingly. 5. To assign an IP address manually, enter the IP address, the subnet mask, and the default gateway. Be sure the IP address does not conflict with any other devices on the network. Note: If there is a server or a router functioning as a gateway, enter the IP address of the server or the router for the gateway address. If there is no gateway, leave the default values. 6. If you want to get a private address between 169.254.1.1 and 169.254.254.254 automatically when an IP address cannot be obtained by the DHCP server, leave the Set Using Automatic Private IP Addressing (APIPA) setting set to Enable; otherwise, select Disable. 7. Select Enable for Acquire DNS Server Address Automatically if you want to acquire the DNS server address using the DHCP server. If you want to enter the DNS server address manually, select Disable and then enter the IP address of the DNS server. 8. Select Enable for Acquire Host Name and Domain Name Automatically if you want to acquire the host name and the domain name using the DHCP server. If you want to specify manually, enter the host name and the domain name in the text boxes. 9. Select Enable for Register Network Interface Address to DNS Server if you want to register the host name and domain name to the DNS server through the DHCP server that supports Dynamic DNS. Network Software 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
Network Software
31
Note:
❏
The network administrator must check any changes made to the IP address
settings.
❏
When
Auto
is selected, DHCP becomes available. A DHCP server/router
must be available on your network.
❏
If
Set Using Automatic Private IP Addressing (APIPA)
is enabled, a private
IP address is automatically assigned to the network interface even when
there are no DHCP servers on your network.
❏
If the Dynamic DNS function is not supported, we recommend that you select
Manual
and then enter an IP address. This is because if you select
Auto
, the
IP address of the network interface changes every time you turn on the printer
so that you need to change the printer port setting accordingly.
5.
To assign an IP address manually, enter the IP address, the subnet mask,
and the default gateway. Be sure the IP address does not conflict with any
other devices on the network.
Note:
If there is a server or a router functioning as a gateway, enter the IP address of
the server or the router for the gateway address. If there is no gateway, leave the
default values.
6.
If you want to get a private address between 169.254.1.1 and
169.254.254.254 automatically when an IP address cannot be obtained by
the DHCP server, leave the
Set Using Automatic Private IP Addressing
(APIPA)
setting set to
Enable
; otherwise, select
Disable
.
7. Select
Enable
for
Acquire DNS Server Address Automatically
if you
want to acquire the DNS server address using the DHCP server.
If you want to enter the DNS server address manually, select
Disable
and
then enter the IP address of the DNS server.
8. Select
Enable
for
Acquire Host Name and Domain Name
Automatically
if you want to acquire the host name and the domain name
using the DHCP server.
If you want to specify manually, enter the host name and the domain name
in the text boxes.
9. Select
Enable
for
Register Network Interface Address to DNS Server
if
you want to register the host name and domain name to the DNS server
through the DHCP server that supports Dynamic DNS.