Epson V11H248020 Quick Reference Guide - (Accolade Wireless Audio Set ) - Page 14
Powering the Receiver, Connecting the Receiver’s Audio Cable, Connecting to an Audio System
UPC - 010343860308
View all Epson V11H248020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Powering the Receiver Connect the larger power adapter to the receiver's power port, then plug the other end into an electrical outlet. When you're done connecting the power adapter, see "Connecting the Receiver's Audio Cable" below. Connecting the Receiver's Audio Cable Follow the steps below to connect the receiver to an audio system. If you don't have access to an audio system, and want to connect the receiver to a pair of unpowered speakers, see page 16 for details. Connecting to an Audio System Before you begin, make sure that the receiver and your audio system are turned off and the audio system's volume is turned all the way down. 1. Depending on the type of audio system you have, you will need to connect the receiver to it using only one of the following cables: ■ The included RCA cable (stereo) ■ The included optical audio cable (surround) ■ An optional coaxial audio cable (surround) Caution: Make sure that the receiver and your audio system are turned off and the audio system's volume is turned all the way down before you connect the audio cable or you may damage your speakers. 14 Setting Up