Epson WorkForce Pro WF-6090 User Manual - Page 180
Print Head Alignment, Aligning the Print Head Using the Product Control Panel
View all Epson WorkForce Pro WF-6090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Print head needs cleaning • If there are no gaps, click Finish. • If there are gaps or the pattern is faint, click Clean to clean the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced. If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without printing. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced. Parent topic: Print Head Cleaning Print Head Alignment If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or light horizontal bands, you may need to align the print head. Note: Banding may also occur if your print head nozzles need cleaning. Aligning the Print Head Using the Product Control Panel Parent topic: Adjusting Print Quality Related topics Loading Paper Aligning the Print Head Using the Product Control Panel You can align the print head using the control panel on your product. 1. Load a few sheets of plain paper in the product. 2. Press the arrow buttons to select Menu and press the OK button. 3. Select Maintenance and press the OK button. 4. Select Print Head Alignment and press the OK button. 180