Epson WorkForce Pro WF-M5299 Users Guide - Page 192
Solving Paper Problems, Parent topic, Related concepts, Related tasks
View all Epson WorkForce Pro WF-M5299 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
• Check your wired LAN router or access point to see if the LED for the port to which your product is connected is on or flashing. If the link LED is off, try the following: • Make sure the Ethernet cable is securely connected to your product and to your router, access point, switch, or hub. • Try connecting your product to a different port or a different router, access point, switch, or hub. • Try connecting with a different Ethernet cable. • Try printing to your product from another computer on the network. Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and 5 GHz) mode. See your router documentation for instructions. • If you are connecting the product via EpsonNet Setup and the Wi-Fi icon does not appear lit on the LCD screen, make sure your product software was installed correctly. If necessary, reinstall your software. Parent topic: Solving Network Problems Related concepts Uninstall Your Product Software Related tasks Printing a Network Status Sheet Related topics Wi-Fi or Wired Networking Solving Paper Problems Check these sections if you have problems using paper with your product. Paper Feeding Problems Paper Jams Inside the Product Paper Ejection Problems Parent topic: Solving Problems 192