Fisher and Paykel DD24STI7 BOOK INSTL DD24S PH7 US CA EN (English) - Page 17

14b REMOVE THE DRAWER 4 1 Product may move. Mark chassis position on cavity 2 3 Press the release tabs in on either side and push back to release drawer from runners 4"1(1000mmmm) To prevent kinked hoses, we recommend rotating the drawer counter-clockwise and resting it on its side after removal. 5 Push drawer runners back in. 16b REFIT THE DRAWER ONTO THE RUNNERS Pounllbfootrhwsairddesth4e"(r1e0le0amsemt)abs Ensure the drawer is now rotated clockwise back. 137 15b SECURE THE DRAWER TO THE CABINETRY 17 The product has three pairs of fixing points: Ensure the sound insulation is repositioned correctly. two pairs of formed brackets on either chassis side (use 5⁄8" (16 mm) screws) 1 2 a pair of fixing holes on the bottom (use 1 ½" (38 mm) fixing screws & washers) 17b INTEGRATED ONLY - SECURE THE EXTERNAL VENT 159 148 Ensure the release tabs on 115 both sides are reset fully. Before refitting the drawer, ensure the hoses are not twisted and the latches at the rear of each drawer runner are facing forward. 126 1 After routing the vent hose through and out the hole cutout, attach and secure the vent by tightening the four screws provided. 2 Airflow