Fluke 54 FE 53 & 54 II Users Manual - Page 17

Changing the Line Frequency, Measuring Temperatures, Connecting a Thermocouple - 2 thermometer

Page 17 highlights

Changing the Line Frequency For optimum rejection of line noise, set the thermometer for the local line frequency as follows: 1. Press K or N until the display shows Li ne. 2. Press E to indicate that you want to change the line setting. 3. Press K or N as needed until the display shows 50 V or 60 V (50 Hz or 60 Hz). 4. Press E to store the line setting in memory. 53 & 54 Series II Measuring Temperatures Measuring Temperatures Connecting a Thermocouple Thermocouples are color coded by type based on the North American ANSI Color Code: Type Color Type Color J Black R Green K Yellow S Green T Blue N Orange E Purple 1. Plug a thermocouple into the input connector(s). 2. Set the thermometer for the correct thermocouple type. To change the thermocouple type, see "Changing Setup Options." 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

53 & 54 Series II
Measuring Temperatures
13
Changing the Line Frequency
For optimum rejection of line noise, set the thermometer
for the local line frequency as follows:
1.
Press
K
or
N
until the display shows
Li
ne
.
2.
Press
E
to indicate that you want to change the
line setting.
3.
Press
K
or
N
as needed until the display shows
50
V
or
60
V
(50 Hz or 60 Hz).
4.
Press
E
to store the line setting in memory.
Measuring Temperatures
Connecting a Thermocouple
Thermocouples are color coded by type based on the
North American ANSI Color Code:
Type
Color
Type
Color
J
Black
R
Green
K
Yellow
S
Green
T
Blue
N
Orange
E
Purple
1.
Plug a thermocouple into the input connector(s).
2.
Set the thermometer for the correct thermocouple
type.
To change the thermocouple type, see “Changing
Setup Options.”