Fluke 54 FE 53 & 54 II Users Manual - Page 22
Communicating with a PC, FlukeView Forms Installation Guide - thermometer manual
View all Fluke 54 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
53 & 54 Series II Users Manual 3. Press M to step through the minimum, maximum, average, and current logged reading. For example, Figure 4 shows the maximum reading in memory. The maximum reading occurred at 1:49 P.M. and was stored in memory location 5. Figure 4. Maximum Reading aat04f.eps 4. Press r to stop viewing logged readings. Note The thermometer calculates the minimum and maximum of all logging sessions in memory. The display shows if the log is empty. Communicating with a PC You can transfer the contents of the thermometer's memory to a PC using FlukeView Forms. The communication requires an IR (infrared) serial connection. Refer to the FlukeView Forms Installation Guide and FlukeView Help. FlukeView Forms places the logged readings into standard (default) or customized forms. The forms also display user comments. You can use these forms to satisfy ISO-9000 documentation requirements. When you send logged readings to a PC, all functions are disabled except power off, backlight, and turning off communication. • Press G, r (PC/IR SEND) to toggle the IR port on and off. The display shows: if Send When the IR port is enabled you can communicate with FlukeView Forms. 18