Foxconn A85GM English Manual. - Page 33

3 ► Smart Power LED Smart Power LED is a feature built on your motherboard to indicate different states during Power On System Test (POST). The LED is located at the front panel, and it displays POST state by different long-short blinking intervals. You can always leave this state enabled. System Status Power LED Status Stop Blinking Condition Normal Always On Always On No Memory Continue blinking On (1sec.), Off (1sec.) Reboot & Memory OK No VGA Card detec Continue blinking On (2sec.), Off (2sec.) Reboot & Display OK Post Error Message Quick blinking twice (1/3sec. On, 1/3sec. Off), one long On (1sec.), continuously. Enter Setup or Skip No CPU Fan Continue blinking On (1/2sec.), Off (1/2sec.) Reboot & Fan OK ► Smart Boot Menu When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. ► Current CPU Speed This item displays the current CPU speed. ► Current FSB Multiplier This item displays the current FSB Ratio. ► Current DRAM Speed This item displays the current DRAM speed, in dual channels. Fox Intelligent Stepping CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Fox Intelligent Stepping CPU Clock Memory Speed Mode GFX Engine Clock Override PCI Express Clock CPU Multiplier Adjust Spread Spectrum [200] [Auto] [Disabled] [100] [Auto] [Enabled] Help Item CPU-NB HT Link Speed NCHT Incoming Link Width NCHT Outgoing Link Width [Auto] [Auto] [Auto] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► CPU Clock This option is used to adjust the CPU clock. ► Memory Speed Mode This item is used to enable/disable provision of DRAM timing by SPD device. The SerialPresence Detect (SPD) device is a small EEPROM chip, mounted on a DDR2 memorymodule. It 26