Frigidaire FFTR2021TS Complete Owner s Guide - Page 15

Controls

Page 15 highlights

CONTROLS Cool Down Period To ensure safe food storage, allow the refrigerator to operate with the doors closed for at least 8 hours before loading it with food. Refrigerator & Freezer Controls  NOTE When first turning refrigerator on, adjust control to recommended. This is the recommended initial setting. After 24 hours, adjust the controls as needed. Allow 24 hrs for adjustments CAUTION Do not install the refrigerator where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the refrigerator. IMPORTANT If you install your refrigerator in a garage or other unheated area, you may experience freezer temperature problems during the winter months when temperatures dip below 55° F. Upgrading your refrigerator with a Garage Kit will lower the minimum operating temperature of your unit to 34° F. This kit can be ordered by calling the phone number listed at the bottom of the warranty page or back cover at an additional cost. Refrigerator Control IMPORTANT Adjusting the refrigerator temperature control to "0" turns off the compressor and prevents the refrigerator from cooling, but does not disconnect the power to the light bulb and other electrical components. To turn off power to your refrigerator, you must unplug the power cord from the wall outlet. Temperature Adjustment • Adjust temperature gradually: adjust the knob in small increments, allowing the temperature to stabilize. • For colder temperatures, adjust the knob towards coldest. • For warmer temperatures, adjust the knob towards cold. Adjusting the refrigerator control will change temperatures in both compartments. The auxiliary freezer control can be left at the factory pre-set (mid position) or adjusted as desired; it has no effect on electrical power to the refrigerator. To maintain temperatures, a fan circulates air in the refrigerator and freezer compartments. For good circulation, do not block cold air vents with food items. Auxiliary Freezer Control 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

15
IMPORTANT
Adjusting the refrigerator temperature control
to “0” turns off the compressor and prevents
the refrigerator from cooling, but does not
disconnect the power to the light bulb and
other electrical components. To turn off power
to your refrigerator, you must unplug the
power cord from the wall outlet.
NOTE
When first turning refrigerator on, adjust
control to recommended. This is the
recommended initial setting. After 24 hours,
adjust the controls as needed.
Refrigerator Control
Allow 24 hrs for adjustments
Auxiliary Freezer Control
Temperature Adjustment
• Adjust temperature gradually: adjust the
knob in small increments, allowing the
temperature to stabilize.
• For colder temperatures, adjust the knob
towards
coldest
.
• For warmer temperatures, adjust the knob
towards
cold
.
Adjusting the refrigerator control will change
temperatures in both compartments. The
auxiliary freezer control can be left at the factory
pre-set (mid position) or adjusted as desired;
it has no effect on electrical power to the
refrigerator.
To maintain temperatures, a fan circulates air
in the refrigerator and freezer compartments.
For good circulation, do not block cold air vents
with food items.
Cool Down Period
To ensure safe food storage, allow the
refrigerator to operate with the doors closed
for at least 8 hours before loading it with food.
Refrigerator & Freezer Controls
CONTROLS
CAUTION
Do not install the refrigerator where the
temperature will drop below 55
°
F (13
°
C) or
rise above 110
°
F (43
°
C). The compressor
will not be able to maintain proper
temperatures inside the refrigerator.
IMPORTANT
If you install your refrigerator in a garage or
other unheated area, you may experience
freezer temperature problems during the winter
months when temperatures dip below 55° F.
Upgrading your refrigerator with a Garage
Kit will lower the minimum operating
temperature of your unit to 34° F. This kit
can be ordered by calling the phone number
listed at the bottom of the warranty page or
back cover at an additional cost.