Frigidaire FFTR2021TS Complete Owner s Guide - Page 8

of door and grasp the thinnest part

Get Frigidaire FFTR2021TS PDF manuals and user guides View all Frigidaire FFTR2021TS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

DOOR REMOVAL/REVERSAL INSTRUCTIONS 9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other hole in hinge and tighten with adjustable wrench. 10. Reverse door handles (see instruction on next page). 11. Move freezer and refrigerator door stops to opposite side. Before starting screws, use an awl to puncture the foam. 12. Position refrigerator door onto bottom hinge pin and screw center hinge pin through center hinge into top of door. Close refrigerator door to help align hinge hole. 13. Tighten center hinge pin with adjustable wrench. 14. Remove cabinet and hinge hole plugs and move to opposite side. 15. Lower freezer door onto center hinge pin. 16. Close freezer door. Lift up on handle side of door and grasp the thinnest part of the top hinge cover (which was removed in Step 2) and insert the thickest part between the doors on the handle side approximately 3 inches from the outside edge. This will ensure proper spacing. 17. Tighten the top hinge screws and check door gasket for open seal condition (gap between gasket and cabinet flange). Look for open areas between the gasket and the cabinet flange. Gasket should seal against the cabinet all the way around including top and bottom 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
8
DOOR REMOVAL/REVERSAL INSTRUCTIONS
9. Unscrew bottom hinge pin using
adjustable wrench. Move hinge pin to
other hole in hinge and tighten with
adjustable wrench.
10. Reverse door handles (see instruction on
next page).
11. Move freezer and refrigerator door stops
to opposite side. Before starting screws,
use an awl to puncture the foam.
12. Position refrigerator door onto bottom
hinge pin and screw center hinge pin
through center hinge into top of door.
Close refrigerator door to help align hinge
hole.
13. Tighten center hinge pin with adjustable
wrench.
14. Remove cabinet and hinge hole plugs and
move to opposite side.
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Lift up on handle side
of door and grasp the thinnest part of
the top hinge cover (which was removed
in Step 2) and insert the thickest part
between the doors on the handle side
approximately 3 inches from the outside
edge. This will ensure proper spacing.
Look for open areas between the
gasket and the cabinet flange.
Gasket should seal against the
cabinet all the way around including top
and bottom
17. Tighten the top hinge screws and check
door gasket for open seal condition (gap
between gasket and cabinet flange).