Frigidaire FFTR2021TS Complete Owner s Guide - Page 6

INSTALLATION To level the cabinet using the front rollers: 1 Remove the toe grille. 3 Use adjustable wrench to adjust leveling screws. Lower the leveling screws on each side clockwise until they contact the floor (Figure 3). Do not raise the cabinet more than 9/16 inch. 9/16" Max 2 Use a flat-blade screwdriver or ⅜ inch socket wrench to raise or lower the front rollers (Figure 2). Do not raise the cabinet more than 9/16 inch. Raise Raise Figure 3  NOTE Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope ¼ inch to ½ inch from front-to-back. Then level the refrigerator from side-to-side. 9/16" Max Figure 2 or 6