Frigidaire FFTR2021TS Complete Owner s Guide - Page 9

Important

Page 9 highlights

DOOR REMOVAL/REVERSAL INSTRUCTIONS 18. Should open seal condition exist, try to massage the gasket to make sure it is seated into the channel. IMPORTANT If the condition still exists, try heating the gasket with a hair dryer with the door closed. Use Caution and be careful not to damage the interior door panel or gasket by applying too much heat. 19. If the open seal condition still exists, it may be necessary to flip the gasket. In this case, remove the gasket from the door by pulling it out. Rotate the gasket half a turn (180 degrees). Reinstall the gasket by inserting the corners first then work towards the middle assuring that it is fully seated in the channel. 20. Flip toe grille and reinstall. 21. Plug in electrical power cord and turn refrigerator temperature control to center position. Adjust setting as necessary. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

9
IMPORTANT
If the condition still exists, try heating
the gasket with a hair dryer with the door
closed. Use Caution and be careful not to
damage the interior door panel or gasket by
applying too much heat.
18. Should open seal condition exist, try to
massage the gasket to make sure it is
seated into the channel.
19. If the open seal condition still exists, it
may be necessary to flip the gasket. In
this case, remove the gasket from the
door by pulling it out. Rotate the gasket
half a turn (180 degrees). Reinstall the
gasket by inserting the corners first then
work towards the middle assuring that it is
fully seated in the channel.
20. Flip toe grille and reinstall.
21. Plug in electrical power cord and turn
refrigerator temperature control to center
position. Adjust setting as necessary.
DOOR REMOVAL/REVERSAL INSTRUCTIONS