Frigidaire FG4H2272UF Complete Owners Guide - Page 7

Door Removal Instructions - refrigerator

Page 7 highlights

DOOR REMOVAL INSTRUCTIONS Getting through narrow spaces If refrigerator will not fit through an entrance area, doors can be removed. Check first by measuring the entrance. To prepare for removing the doors: 1 Make sure the electrical power cord is unplugged from the wall outlet. 2 Remove any food from the door shelves and close the doors. To remove the refrigerator doors: 1 Open doors to 90°. 2 Remove all five PhillipsTM screws from top hinge cover and lift up. Phillips Screws Top Hinge Cover 5 Pull up on water line gently to remove from door. Waterline  NOTE Use care while pulling the water tube from the door to be sure that tube does not kink.  NOTE Approximately four feet of water tube will be pulled from the refrigerator door. CAUTION 3 Trace lightly around the door's top hinges with a pencil. This makes reinstallation easier. 4 Disconnect electrical harness running from door to hinge cover. Be sure doors are set aside in a secure position where they cannot fall and cause personal injury, or damage to the doors or handles. 6 Remove three 8mm bolts from both top hinges. Lift doors up off lower hinges and carefully set aside.. x2 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

NOTE
Use care while pulling the water tube from
the door to be sure that tube does not kink.
NOTE
Approximately four feet of water tube will be
pulled from the refrigerator door.
7
DOOR REMOVAL INSTRUCTIONS
Getting through narrow spaces
If refrigerator will not fit through an entrance
area, doors can be removed. Check first by
measuring the entrance.
To prepare for removing the doors:
1 Make sure the electrical power cord is
unplugged from the wall outlet.
2 Remove any food from the door shelves
and close the doors.
To remove the refrigerator doors:
1 Open doors to 90°.
2 Remove all five Phillips
TM
screws from top
hinge cover and lift up.
Phillips Screws
Top
Hinge
Cover
5 Pull up on water line gently to remove
from door.
Waterline
3 Trace lightly around the door’s top hinges
with a pencil. This makes reinstallation
easier.
4 Disconnect electrical harness running from
door to hinge cover.
6 Remove three 8mm bolts from both top
hinges. Lift doors up off lower hinges and
carefully set aside..
x2
CAUTION
Be sure doors are set aside in a secure position
where they cannot fall and cause personal
injury, or damage to the doors or handles.