Frigidaire FG4H2272UF Complete Owners Guide - Page 8

IMPORTANT, To remove the Custom-Flex, Temp Drawer

Page 8 highlights

DOOR REMOVAL INSTRUCTIONS 7 To gain access to lower hinge, drawer will To remove the Custom-FlexTM need to be extended. Unscrew the three lower Temp Drawer hinge screws and slide the hinge inwards. 1 Fully open drawer. 2 Remove basket from drawer. 3 Unsnap the 4 cable ties by pressing clip sides together and pushing through opening. Cable Clip Cable Tie Lower Hinge Removal 8 To reinstall doors, reverse procedure. IMPORTANT Make sure water line tubing goes through hole at top of dispenser pocket. There is also a metal wrap on the tubing to prevent damage from the hinge rubbing against it. This needs to be fixed back around the tube in the proper location upon reinstallation (just as long as the tube is protected from the hinge).  NOTE When reinserting the water tube and replacing the top hinge cover, use care to be sure the tube does not kink. Once both doors are in place, ensure they are aligned with each other and level (Reference the Installation section for more details), and replace the top hinge cover. RetCaliinping (4) Cable Ties NOTE: Do Not Remove or Cut Cable Ties From Wire Harness 4 Remove screw and retaining clip and disconnect the harness Screw To Cabinet Harness Retaining Clip 5 Remove drawer by pressing on the liner clips and slide rail past clips on both sides to fully remove drawer from cabinet. Press the two tabs on both sides to release the sliders 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

IMPORTANT
Make sure water line tubing goes through
hole at top of dispenser pocket. There is also
a metal wrap on the tubing to prevent dam-
age from the hinge rubbing against it. This
needs to be fixed back around the tube in the
proper location upon reinstallation (just as
long as the tube is protected from the hinge).
NOTE
When reinserting the water tube and replac-
ing the top hinge cover, use care to be sure
the tube does not kink.
8
DOOR REMOVAL INSTRUCTIONS
Lower Hinge Removal
Once both doors are in place, ensure they are
aligned with each other and level (Reference
the Installation section for more details), and
replace the top hinge cover.
8 To reinstall doors, reverse procedure.
7 To gain access to lower hinge, drawer will
need to be extended. Unscrew the three lower
hinge screws and slide the hinge inwards.
To remove the Custom-Flex
TM
Temp Drawer
1 Fully open
drawer.
2 Remove
basket from
drawer.
3 Unsnap the 4
cable ties by
pressing clip sides together and pushing
through opening.
4 Remove screw and retaining clip and
disconnect the harness
5 Remove drawer by pressing on the liner
clips and slide rail past clips on both sides
to fully remove drawer from cabinet.
Press the two
tabs on both
sides to release
the sliders
Cable
Tie
Cable
Clip
NOTE: Do Not Remove or Cut
Cable Ties From Wire Harness
(4) Cable
Ties
Retaining
Clip
Retaining Clip
To Cabinet
Harness
Screw