Frigidaire FG4H2272UF Complete Owners Guide - Page 9

Removing Freezer Drawer, Reinstalling Freezer Drawer, CAUTION, Reinstalling the Custom-Flex, Temp

Page 9 highlights

DOOR REMOVAL INSTRUCTIONS Reinstalling the Custom-FlexTM Temp Drawer Removing Freezer Drawer 1 Place drawer with brackets and sliders inside compartment and click sliders into place on each side. IntoCPliclakce CAUTION Drawer is heavy. Use caution when lifting. 1 Open drawer and fully extend. 2 Remove the freezer drawer. 3 Remove the freezer basket. 4 Inside the cabinet, press the two tabs on both sides to release the sliders. 5 Remove the drawer with brackets and sliders. 2 Reconnect cabinet harness. 3 Replace retaining clip and secure with screw. Reconnect Cabinet Harness Screw 1 2 Press the two tabs on both sides to release the sliders Freezer Drawer Retaining Clip 4 Reattach electrical harness by positioning the cable clips over the black markings on the harness and push the 4 cable clips through openings in rail to secure harness in place. Freezer Basket Black Marking Position cable clips over the black markings before attaching. Reinstalling Freezer Drawer 1 Place drawer with brackets and sliders inside the cabinet and click into place. 2 Replace the basket.  NOTE For additional instructions, see Storage Features section. 5 Slide basket into place. 6 Close drawer. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

NOTE
For additional instructions, see Storage
Features section.
9
1 Open drawer and fully extend.
2 Remove the freezer drawer.
3 Remove the freezer basket.
4 Inside the cabinet, press the two tabs on
both sides to release the sliders.
5 Remove the drawer with brackets and
sliders.
Removing Freezer Drawer
DOOR REMOVAL INSTRUCTIONS
Freezer
Drawer
Freezer
Basket
Press the two tabs
on both sides to
release the sliders
Reinstalling Freezer Drawer
1 Place drawer with brackets and sliders
inside the cabinet and click into place.
2 Replace the basket.
CAUTION
Drawer is heavy. Use caution when lifting.
Reinstalling the Custom-Flex
TM
Temp Drawer
1 Place drawer with brackets and sliders
inside compartment and click sliders into
place on each side.
2 Reconnect cabinet harness.
3 Replace retaining clip and secure with screw.
Retaining Clip
Reconnect
Cabinet Harness
Screw
1
2
4 Reattach electrical harness by positioning
the cable clips over the black markings
on the harness and push the 4 cable clips
through openings in rail to secure harness
in place.
Black
Marking
Position
cable clips
over the black
markings before
attaching.
5 Slide basket
into place.
6 Close
drawer.
Click
Into Place