Frigidaire FGEF3031KW Complete Owner's Guide (English) - Page 7

Before Setting Oven Controls, Important

Page 7 highlights

Oven vent location The oven vent is located under the left side of the control panel (See Fig. 1). When the oven is on, warm air passes through this vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block the oven vent. oven vent location BEFORE SETTING OVEN CONTROLS Types of oven racks Your range may be equipped with one or more of the oven rack styles shown. flat handle oven rack flat oven rack Fig. 1 Removing, replacing & arranging racks To remove - pull the rack forward until it stops. Lift up front of rack and slide out. To replace - fit the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place. Arranging - always arrange the oven racks when the oven is cool (prior to operating the oven). CAUTION Always use oven mitts when using the oven. When using the appliance, oven racks and cooktop will become very hot which can cause burns. 7 7 6 6 5 5 4 4 3 3 2 2 1 1 Oven with visible bake element - Fig. 2 Oven with hidden Bake Element - Fig. 3* offset oven rack Effortless™ Oven Rack bottom oven rack The flat oven rack or flat handle oven rack (some models) may be used for most cooking needs. The Effortless™ Oven Rack (some models) is described later in this section. The offset oven rack (some models) is designed to place the base of the rack about 1/2 of a rack position lower than normal. This rack design provides several additional possible positions between the standard postions. To maximize oven cooking space place the bottom oven rack (some models) in the lowest rack position for baking and when roasting large cuts of meat. IMPORTANT Only the Effortless™ Oven Rack should be used in oven rack position 2. Placing any other rack in rack position 2 will prevent the oven door from fully closing. Recommended rack positions by food type Food type Position models with visible bake element (Fig. 2) Position models with hidden bake element (Fig. 3*) Broiling meats Cookies, cakes, pies, biscuits & muffins Frozen pies, angel food cake, yeast, bread, casseroles Small cuts of meat or poultry Turkey, roast or ham See broil section 3 or 4 2 or 3 2 or 3 2 See broil section 3 or 4 2 or 3 2 or 3 1 or 2 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

7
Types of oven racks
Your range may be equipped with one or more of the oven
rack styles shown.
BEFORE SETTING OVEN CONTROLS
Oven vent location
The oven vent is located
under the left side of the
control panel
(See Fig. 1).
When the oven is on, warm
air passes through this vent. This venting is necessary for
proper air circulation in the oven and good baking results.
Do not block the oven vent.
oven vent location
Fig. 1
Recommended rack positions by food type
Food type
Position
models with
Position
models with
visible bake element (Fig. 2)
hidden bake element (Fig. 3*)
Broiling meats
See broil section
See broil section
Cookies, cakes, pies, biscuits & muffins
3 or 4
3 or 4
Frozen pies, angel food cake, yeast, bread, casseroles
2 or 3
2 or 3
Small cuts of meat or poultry
2 or 3
2 or 3
Turkey, roast or ham
2
1 or 2
flat
oven rack
flat handle
oven rack
bottom
oven rack
offset
oven rack
Oven with visible
bake element - Fig. 2
Oven with hidden
Bake Element - Fig. 3*
The
flat oven rack
or
flat handle oven rack
(some
models) may be used for most cooking needs. The
Effortless™ Oven Rack
(some models) is described later
in this section.
The
offset oven rack
(some models) is designed to place
the base of the rack about 1/2 of a rack position lower than
normal. This rack design provides several additional
possible positions between the standard postions.
To maximize oven cooking space place the
bottom oven
rack
(some models) in the lowest rack position for baking
and when roasting large cuts of meat.
Removing, replacing & arranging racks
To remove
- pull the rack forward until it stops. Lift up
front of rack and slide out.
To replace
- fit the rack onto the guides on the oven walls.
Tilt the front of the rack upward and slide the rack back into
place.
Arranging
- always arrange the oven racks when the oven
is cool (prior to
operating the oven).
Always use oven mitts when using the oven.
When
using the appliance, oven racks and cooktop will become
very hot which can cause burns.
2
3
4
5
6
1
7
2
3
4
5
6
1
7
CAUTION
Effortless™
Oven
Rack
Only the Effortless™ Oven Rack should be used in
oven rack position 2.
Placing any other rack in rack
position 2 will prevent the oven door from fully closing.
IMPORTANT