Frigidaire FGGH3047VF Complete Owners Guide - Page 42

CARE AND CLEANING Removing and Replacing the Oven Door CAUTION The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To remove the oven door: 1. Open oven door completely, horizontal with floor. 2. Pull up the lock located on each hinge support toward front of the oven until the lock stops. You may have to apply a little upward pressure on the lock to pull it up (Figure 36 and Figure 37). 3. Grasp the door by the sides, and close the door until the door frame makes contact with the unlocked hinges. 4. Pull the bottom of the door toward you while rotating the top of the door toward the appliance to completely disengage the hinge levers (Figure 38). To Replace Oven Door: 1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (Figure 38). 2. Hold the oven door at the same angle as the removal position. Carefully insert the hinge levers into the oven frame until you feel the hinge levers are seated into the hinge notches. The hinge arms must be fully seated into the hinge notches before the oven door can be fully opened. (Figure 38). 3. Fully open the oven door, horizontal with floor (Figure 35). 4. Push the door hinge locks up toward and into the oven frame on both left and right oven door hinges to the locked position (Figure 36). 5. Close the oven door. Oven door hinge locations Figure 35: Door hinge location Figure 36: Door hinge locks Figure 37: Unlocking door hinge IMPORTANT Special door care instructions - Most oven doors contain glass that can break. Do not hit the glass with pots, pans, or any other object. Scratching, hitting, jarring, or stressing the glass may weaken its structure, causing an increased risk of breakage at a later time. Do not close the oven door until all of the oven racks are fully in place. Hinge notch Door frame flush with hinge lock Figure 38: Replacement and location of hinge arm and roller pin 42