Frigidaire FGHG2368TF Complete Owner s Guide - Page 17

CONTROLS - NON-DISPENSER MODELS User Interface In-Door Controls (options may vary) IMPORTANT Pressing the system on/off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet. An indicator light will be illuminated above most active features. Touch the icon to activate the options below. Power On Off Default Settings Quick Freeze Quick Ice Air Filter Water Filter Alert Reset F/C Press and hold for three seconds to turn off the cooling system to clean the refrigerator. The digital displays will read OFF. Resets all refrigerator settings such as temp, temp display and tones to their factory default settings. Activates a faster rate for freezing food. Temporarily increases cooling for freezer to increase the production of ice Filter condition status is always displayed when door is open. Press and hold for three seconds to reset after filter change. Press and hold for three seconds to reset after filter change. Tones emitted by each key press can be turned off based on user preference. The sounds are muted when the red indicator is lit. Warning signals will stay active. Touch to toggle display from Fahrenheit to Celsius. Setting cooling temperatures Press the + or − indicator to adjust the temperature to the desired setting. The temperature setting will begin to blink with the first touch. The display will time out after 10 seconds and return to the basic display.  NOTE The recommended settings for a product installed in a kitchen is 37˚F for the fresh food compartment and 0˚F for the freezer. 17