Frigidaire FGHG2368TF Complete Owner s Guide - Page 9

CAUTION, To reinstall the refrigerator doors, Removing Freezer Drawer, Re-installing Freezer Drawer

Page 9 highlights

DOOR REMOVAL INSTRUCTIONS  NOTE You will be pulling approximately five feet of water tube from the back of the refrigerator. Once both doors are in place, ensure they are aligned with each other and level (Please see the Installation section for more details), and replace the top hinge cover. Removing Freezer Drawer 4 Unscrew the three lower hinge screws and slide the hinge inwards. CAUTION Drawer is heavy. Use caution when lifting. 1 Remove 4 hex head drawer screws. 2 Lift up drawer to remove. DO NOT Remove Other Screws Lower Hinge Removal CAUTION Be sure doors are set aside in a secure position where they cannot fall and cause personal injury, or damage to the doors or handles. To reinstall the refrigerator doors: Reverse the above steps. Remove Hex Head Drawer Screw  NOTE Upon replacement, the tube needs to be fully inserted up to the marking line. Re-installing Freezer Drawer 1 Lower drawer back into place. 2 Replace 4 hex head drawer screws and tighten. Insert tube up to the marking line Press Press Water Line DO NOT Loosen or Remove These 3 Hex Screws Approximately 5 feet  NOTE When reinserting the water tube and replacing the top hinge cover, use care to be sure you do not kink the tube. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

CAUTION
Be sure doors are set aside in a secure position
where they cannot fall and cause personal
injury, or damage to the doors or handles.
CAUTION
Drawer is heavy. Use caution when lifting.
9
DOOR REMOVAL INSTRUCTIONS
Lower Hinge Removal
4 Unscrew the three lower hinge screws and
slide the hinge inwards.
Once both doors are in place, ensure they are
aligned with each other and level (Please see
the Installation section for more details), and
replace the top hinge cover.
Press
Press
Approximately
5 feet
Water
Line
Insert tube
up to the
marking
line
To reinstall the refrigerator doors:
Reverse the above steps.
Remove
Hex Head
Drawer Screw
DO NOT
Remove
Other
Screws
DO NOT
Loosen
or
Remove
These 3
Hex
Screws
1 Remove 4 hex head drawer screws.
2 Lift up drawer to remove.
Removing Freezer Drawer
Re-installing Freezer Drawer
1 Lower drawer back into place.
2 Replace 4 hex head drawer screws and
tighten.
NOTE
You will be pulling approximately five feet of
water tube from the back of the refrigerator.
NOTE
Upon replacement, the tube needs to be
fully inserted up to the marking line.
NOTE
When reinserting the water tube and
replacing the top hinge cover, use care to be
sure you do not kink the tube.