Fujitsu FI 5015C Getting Started Guide - Page 18

4. Connect the ADF cable to the ADF cable connector on the scanner, and secure it with screws. 2.3 Connecting the Scanner to Your PC Follow the procedure below to connect the USB cable. 1. Connect the USB interface cable to the USB interface connector. Screw 5. Connect the AC adapter. ATTENTION Use only the AC adapter provided by the manufacturer. 1) Connect the AC cable to the AC adapter. 2) Connect the AC adapter connector to the scanner's DC inlet. 3) Plug the AC cable into the outlet. The Function Number Display and the LED HINT may flash for an instant when plugging the AC cable into the outlet. 2. Connect the other end of the USB interface cable to the PC. ATTENTION • Be sure to use the USB cable which comes as an accessory with this scanner. Correct operation with commercially available cables is not guaranteed. • When connecting to an USB hub, use the first stage USB hub that is closest to the computer. If you use the second or later hub stages, the scanner may not operate correctly. • If you connect the scanner with USB 2.0, it is required that the USB port and Hub are compliant with USB 2.0. The scanning speed may slow down if it is connected with USB1.1. 3. Press the "I" side of the main power switch to turn on the scanner. 4. Press the power button to turn ON the scanner. Your scanner will be automatically detected. For Windows 98: When a request for inserting the CD-ROM for Windows 98 appears, insert it into the CD drive and click the [OK] button. For Windows 2000: When [Digital Signature not Found] appears, click [Yes]. The installation of the scanner is completed. 10