Fujitsu FI 5015C Getting Started Guide - Page 22

Symptom Paper is not fed (pick error occurs frequently, or document stops midway). The generated images are elongated. There is a shadow on the leading edge of the generated image? Check this item Remedy Do the documents satisfy the "Document Quality"in Section 2.3.1of the fi5015C Operator's Guide? Is the thick document placed on the Flatbed? Is the Pick roller unit dirty? Is the Pick roller unit worn out? Are the Pick roller unit dirty? Are the Pick roller unit dirty? Have you adjusted the offset (the scanning starting position)? Scan the document by Flatbed. Is the thick document placed on the Flatbed? Clean the Pick roller unit. Refer to the Operator's Guide "3.2.3 Cleaning the ADF". Replace the Pick roller unit. Refer to the Operator's Guide "3.3.4 Replacing the Pick roller unit". Clean the Pick roller unit. Refer to the Operator's Guide "3.2.3 Cleaning the ADF". Clean the Pick roller unit. Refer to the Operator's Guide "3.2.3 Cleaning the ADF". Adjust the [Sub-scan Setting] on [Scanners and Cameras] in the control panel. * "Multi feed" means that more than 2 papers are fed at the same time. AP-2