Fujitsu FI 5015C Getting Started Guide - Page 24
Appendix2
UPC - 097564307713
View all Fujitsu FI 5015C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Appendix2 DAILY CARE WARNING When operating the scanner, the ADF's inside glass becomes very hot. Before you clean inside the scanner, turn off its power and unplug the AC adapter from the outlet. Wait for at least 15 minutes. ■ Locations and Cycle for Cleaning Part to clean Pad ASSY Pick roller unit Pinch roller Glass Standard Cleaning Cycle Clean these parts after every 1,000 scans. ■ Cleaning Materials Cleaning Materials Cleaner F1 (or isopropyl alcohol) Lint-free dry cloth Parts No. Remarks CA995010013 1 bottle Moisten a cloth with this fluid and wipe the scanner clean. - Commercially available one For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner. ■ Cleaning Method The ADF must be cleaned with a lint-free cloth moistened with the Cleaner F1. ATTENTION The scanner must be cleaned more frequently if you scan any of the following type of sheets: • Documents of coated paper • Documents that are almost completely covered with printed text or graphics • Chemically treated documents such as carbonless paper • Documents containing a large amount of calcium carbonate • Documents written by pencil • Documents with not enough fixed a toner. For details on the cleaning the ADF, refer to "3.2 cleaning the ADF" in fi-5015C Operator's Guide on the Setup CD-ROM". AP-4