Fujitsu FPCM21971 M2010 User's Guide (Configuration CP439101-01) - Page 58
Installing a Memory Upgrade Module,
View all Fujitsu FPCM21971 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Installing a Memory Upgrade Module 1 Remove the new memory upgrade module from the static guarded sleeve. 2 Align the memory upgrade module with the component side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment. (Figure 14) 3 Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and into the connector until it lodges under the retaining clip. You will hear a click when it is properly in place. 4 Replace the cover. 5 Replace the screws. Figure 14. Installing a Memory Module THE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK. ONCE IT IS INSTALLED, YOU SHOULD LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY. 58 - Memory Upgrade Module