Fujitsu MJA2500BH Maintenance Manual - Page 311

power supply segment 3-10 power-on cashing function 6-21 power-on reset 5-187 power-on sequence 4-6, 4-7, 5-187 power-on, response to 6-2 primitive mnemonic 5-5 programmable filter circuit 4-11 protocol, command 5-175 R raw attribute value 5-61 READ BUFFER 5-100 read circuit 4-11 READ DMA 5-96 READ DMA EXT 5-145 READ FP DMA QUEUED 5-169 READ FP DMA QUEUED command protocol 5-185 READ LOG DMA EXT 5-167 READ LOG EXT 5-148 READ LOG EXT log page 10h, data format of 5-150, 5-151 READ MULTIPLE 5-89 READ MULTIPLE command, execution example of 5-90 READ MULTIPLE EXT 5-147 READ NATIVE MAX ADDRESS ...... 5-137 READ NATIVE MAX ADDRESS EXT 5-146 READ SECTOR(S 5-32 READ SECTOR(S) EXT 5-144 read segment buffer, using 6-16 READ VERIFY SECTOR(S 5-38 READ VERIFY SECTOR(S) EXT ...... 5-164 read/write circuit 2-3, 4-3, 4-10 read/write circuit block diagram 4-10 read/write preamplifier (PreAMP 4-10 read-ahead cache 6-13 read-ahead cache system 1-3 RECALIBRATE 5-31 recommended equipment 3-8 recommended power-off sequence ......... 1-14 register - device to host 5-16 register - host to device 5-15 reliability 1-12 reset 6-2 reset response 6-21 reset, power-on and COMRESET......... 5-187 response to COMRESET 6-4 response to power-on 6-2 response to software reset 6-7 rewriting microcode data (640 K bytes ), example of 5-45 ripple 1-7 Index rule for maintenance 7-2 S SATA interface 2-3 SATA interface cable connection 3-11 SCT COMMAND SET 5-76, 5-162 SCT READ DATA 5-82, 5-153 SCT STATUS REQUEST............5-72, 5-152 SCT WRITE DATA 5-83, 5-163 sector count field 5-23 sector number field 5-23 SECURITY DISABLE PASSWORD 5-135 SECURITY ERASE PREPARE 5-130 SECURITY ERASE UNIT 5-131 SECURITY FREEZE LOCK 5-133 SECURITY SET PASSWORD 5-126 SECURITY SET PASSWORD data, contents of 5-126, 5-131 SECURITY UNLOCK 5-128 SEEK 5-40 seek operation 4-17 selective self-test feature flag 5-70 selective self-test log data structure......... 5-69 selective self-test pending time [min 5-70 self-calibration 4-8 self-calibration content 4-8 self-diagnosis 1-3 self-diagnostics 7-8 self-test execution status 5-62, 5-68 self-test index 5-68 self-test number 5-68 sensing and compensating for external force 4-8 sequential hit 6-17 serial ATA function 5-124 service area 3-7 service life 1-12 servo burst capture circuit 4-13 servo circuit 4-3 servo control 4-12 servo control circuit 4-12 servo frame format 4-16 servo mark 4-16 set device bits - device to host 5-21 SET FEATURES 5-119 SET MAX 5-138 SET MAX ADDRESS 5-138 SET MAX ADDRESS EXT 5-156 SET MAX FREEZE LOCK 5-143 SET MAX LOCK 5-141 SET MAX SET PASSWORD 5-139 SET MAX UNLOCK 5-142 C141-E293 IN-5