Fujitsu P7230 P7230 User's Guide - Page 33
Flexible Bay Devices, Removing and Installing Modular Devices - ram
View all Fujitsu P7230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Getting to Know Your LifeBook Flexible Bay Figure 2-17 Flexible Bay Flexible Bay Devices Your Fujitsu LifeBook notebook contains a Flexible Bay. The Flexible Bay can accommodate a modular DualLayer Multi-Format DVD Writer, a modular DVD/CDRW combo drive, a modular Lithium ion battery, or a weight saver. (Figure 2-17) ■ Modular Dual-Layer Multi-Format DVD Writer: This allows you to access movies, software, and audio DVD/CDs and record to DVD+R DL, DVD+RW, CDR/RW, DVD-R, and DVD-RAM discs. ■ Modular DVD/CD-RW combo drive: This allows you to access movies, software, and audio DVD/CDs as well as to write to CDs. ■ Modular Lithium ion battery: This is a rechargeable battery that can be used to power your LifeBook notebook when an adapter is not connected. ■ Weight Saver: This is used to fill the bay when no device is installed. REMOVING AND INSTALLING MODULAR DEVICES To remove and install modular devices in the Flexible Bay, you can perform either a cold-swapping or hotswapping of the device. Cold-swapping means swapping devices while your LifeBook notebook is powered off. Hot-swapping occurs when your system is powered on with a charged main battery or AC Adapter. You should never leave your Flexible Bay empty when the notebook is in operation. If left empty, dust or foreign matter may accumulate inside the notebook. Cold-swapping To cold-swap modular devices in your Flexible Bay follow these easy steps: 1. Close any open files. 2. Shut down your LifeBook notebook. 3. Turn the system over and slide the release latch (Figure 2-18). Pull out the Flexible Bay device from the slot. Flexible Bay Release Latch Flexible Bay Release Latch Figure 2-18 Removing a device from the Flexible Bay Be careful when aligning and seating devices in the bay. If the fit is incorrect, you may damage the bay or the device. If the device does not move easily in the bay, remove it, and check for dirt or foreign objects. It will require a firm push to latch the device in place. 23