Fujitsu P7230 P7230 User's Guide - Page 34
listed under My Computer and Windows Explorer., Hot-swapping
View all Fujitsu P7230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
LifeBook P7000 Notebook - Section Two Figure 2-19 Installing a device in the Flexible Bay 4. Slide the device you are installing into your notebook until it clicks into place. (Figure 2-19) 5. It is now safe to turn your notebook back on. 6. You can now access and use the device. Your LifeBook notebook will automatically detect the new device and activate it within your system. The drive letters associated with the device will be created and listed under My Computer and Windows Explorer. Hot-swapping To hot-swap Flexible Bay devices while the system is powered on, follow these steps: 1. Prior to performing the hot-swap, make sure you have a charged main battery installed, or an AC Adapter is powering the system. 2. If your system is in Suspend mode, press the Suspend/Resume button to resume operation. 3. Pull out the Flexible Bay eject lever. This will push your device out slightly, allowing you to remove the device. 4. Slide your device out until it is clear of the bay. This will require light force. Be careful when aligning and seating devices in the bay. If the fit is incorrect, you may damage the bay or the device. If the device does not move easily in the bay, remove it, and check for dirt or foreign objects. It will require a firm push to latch the device in place. 5. Slide the device you are installing into your notebook until it clicks into place. 6.. You can now access and use the device. Your LifeBook notebook will automatically detect the new device and activate it within your system. The drive letters associated with the device will be created and listed under My Computer and Windows Explorer. 24