Fujitsu fi-5530C Operation Manual - Page 124
Multi feed Detection Conditions, Check overlapping, Check length, Check overlapping and length
UPC - 097564306778
View all Fujitsu fi-5530C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
6.5 Multi feed Detection Conditions One of the following is selected to detect a multi feed: • Check overlapping • Check length • Check overlapping and length The following describes what condition is required for each selection: ■ Check overlapping Paper weight 52 g/m2 - 127 g/m2 (13.9 lb to 34.0 lb) Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document. Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document. ■ Check length Document length deviation 1 % or less Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document. ■ Check overlapping and length Paper weight 52 g/m2 - 127 g/m2 (13.9 lb to 34.0 lb) Document length deviation 1 % or less Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document. Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document. ATTENTION Multifeed detection by overlap will often mis-detect very thick paper or plastic document. When scanning documents like this, please disable the multifeed detection. 108