Fujitsu fi-5530C Operation Manual - Page 65

2.8 Detecting Multi Feeds

fi-5530C Image Scanner Operator’s Guide

49

SCANNING VARIOUS TYPES OF DOCUMENTS

2

2.

Click the [Multi feed] button.

⇒

The following screen is displayed.

3.

Specify the settings on the "Area for Multi feed Detection..." screen.

1)

Mark the "Enable" check box.

2)

Select if the Multi Feed Detection shall be applied or not for a set area.

•

To specify an area for which the Multi Feed Detection will be conducted:

⇒

check "Select area for applying Multi feed Detection."

•

To specify an area for which the Multi Feed

Detection will NOT be conducted:

⇒

check "Select area for not applying Multi feed Detection."

3)

Specify the "Start" of the area.

Enter the position from where the detection

shall be started, meassured from the docu-

ment's top edge.

(Possible values: 0 through 510mm; value of the even number)

4)

Specify the "End" of the area.

Enter the position where the detection shall end, meassured from the document's top

edge. (Possible values: 0 through 510mm; value of the even number)

HINT

•

You can select an area meassured from the top of the document, for

which the multi feed detection will be conducted (or not).

•

If you do not mark the "Enabled" checkbox, the settings for "Select

Area to enable Multi feed Detection" / "Select Area to disable Multi feed

Detection"

will not be available. In this case, multi feed detection is

conducted over the central column (width: 35mm) of the document to

be scanned. (Refer to "Multi feed Detection Conditions" on page 108)

ATTENTION

The value for "End" must be larger than the value for "Start."

Section	Page
CONTENTS	3
Regulatory Information	7
Note, Liability	9
Safety Precautions	12
Chapter 1 BASIC SCANNER OPERATIONS	17
1.1 Turning the Scanner ON	18
1.2 Loading Documents on the ADF for Scanning	22
1.3 Scanning Documents	26
1.4 How to use the Scanner Driver	28
Chapter 2 SCANNING VARIOUS TYPES OF DOCUMENTS	43
2.1 Scanning double sided Documents	44
2.2 Scanning Documents with different Widths	46
2.3 Scanning thin Documents	47
2.4 Scanning Documents longer than A3 size	48
2.5 Saving scanned Images in PDF Format	50
2.6 Excluding a Color from the Image (dropout color)	57
2.7 Skipping blank Pages	59
2.8 Detecting Multi Feeds	61
2.9 Correcting skewed Documents	66
Chapter 3 DAILY CARE	69
3.1 Cleaning Materials and Locations requiring Cleaning	70
3.2 Cleaning the ADF	71
Chapter 4 REPLACING CONSUMABLES	77
4.1 Consumable and Replacement Cycle	78
4.2 Replacing the Pad ASSY	82
4.3 Replacing the Pick Roller	86
Chapter 5 TROUBLESHOOTING	95
5.1 Removing Jammed Documents	96
5.2 Error Indications in the Function Number Display	98
5.3 Remedying Common Troubles	100
5.4 Items to check before contacting the agent where you bought the scanner	113
5.5 Checking Labels on the Scanner	115
Chapter 6 DOCUMENT SPECIFICATIONS FOR ADF	117
6.1 Document Size	118
6.2 Document Quality	119
6.3 Maximum ADF Capacity	122
6.4 Area not to be perforated	123
6.5 Multi feed Detection Conditions	124
Chapter 7 SCANNER SPECIFICATIONS	127
7.1 Basic Specifications	128
7.2 Installation Specifications	130
7.3 External Dimensions	131
APPENDIX A Using [Scan] or [Send to] button	133
APPENDIX B GLOSSARY OF TERMS	136

Fujitsu fi-5530C Operation Manual - Page 65

Click the [Multi feed] button., Enter the position from where the detection

Page 65 highlights