Fujitsu fi-5530C Operation Manual - Page 22
Loading Documents on the ADF for Scanning
UPC - 097564306778
View all Fujitsu fi-5530C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
1.2 Loading Documents on the ADF for Scanning For details about document specifications for ADF, refer to Chapter6 "DOC- HINT UMENT SPECIFICATIONS FOR ADF" (page 101). 1. Align the edges of the documents. 1) Confirm that all the documents have the same width. 2) Check the number of the sheets in the document stack. The standard number of sheets that can be loaded on the scanner is as follows: • A4-size paper or smaller that makes a document stack of 10mm or less (100 sheets at 80 g/m2 or at 20 lb) • Over A4-size paper that makes a document stack of 5mm or less (50 sheets at 80 g/m2 or at 20 lb) 2. Fan the documents as follows: 1) Lightly grip both ends of the documents with both hands, and bend the documents as follows. 2) Hold the documents firmly with both hands and bend them back as follows so that the bent section rises up in the middle of the stack as shown below. 3) Repeat steps 1) and 2) a couple of times. 4) Rotate documents 90 degrees, and fan again. 3. Align the top of the documents. 6