Fujitsu fi-5530C Operation Manual - Page 62
To Specify the Area for Multi feed Detection, For Windows 98 / Windows Me / Windows 2000 / Windows XP
UPC - 097564306778
View all Fujitsu fi-5530C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
The following are the detection conditions None Check overlapping Check length Check overlapping and length Multi feed detection is not performed The scanner monitors the overlapping of documents. The scanner detects a multi feed by differences in ultrasonic propagation. The scanner monitors the length of documents. The scanner detects a multi feed by differences in the document length. The scanner monitors both document overlapping and length to detect multi feeds. Furthermore, refer to "6.5 Multi feed Detection Conditions" on page 108 for detailed information about the document for multi feed detection. 4. Click the [OK] button. The display returns to the [TWAIN Driver] dialogbox. Then, scan the documents by the dialogbox. ■ To Specify the Area for Multi feed Detection Normally multi feed detection will monitor paper overlap over the central column (width: 35mm) of the document to be scanned. This will cause certain documents, such as resumes and postcards with photographs or stamps, to be accidently recognized as being multi fed. When scanning these kinds of documents, you can specify an exact detection or non-detection area (excluding the area containing the photograph or stamp) to prevent mis-detections. The procedure is as follows. 1. Open Scanner's Properties. •For Windows 98 / Windows Me / Windows 2000 / Windows XP 1) When turning on the power, check that the scanner is connected to your PC.Refer to "2.2 Connecting the Scanner to a PC" in fi-5530C Getting Started on the CD-ROM for information about connecting the scanner to your personal computer. 2) Double click the "Printer and Other Hardware" icon on the Control panel of your PC. ⇒ The [Printer and Other Hardware] window appears. 46