Garmin 72H Owner's Manual - Page 11

Attaching the Wrist Strap, Acquiring GPS Satellite Signals, Adjusting the Backlight, Setup - how to use

Page 11 highlights

Attaching the Wrist Strap 1. Place the loop of the wrist strap through the slot opening at the bottom of the device. 2. Route the strap through the loop, and pull it tight. Getting Started The bars on the GPS Information Page indicate the satellite strength. When the bars are filled in, the GPS 72H has acquired satellite signals. For more information, see page 19. Adjusting the Backlight 1. Press and quickly release . 2. Use the rocker to adjust the brightness and contrast. Brightness Contrast Acquiring GPS Satellite Signals 1. Go outdoors to an open area, away from tall buildings and trees. 2. Turn on the device. Acquiring satellite signals can take a few minutes. To adjust the backlight time: 1. From the Main Menu, select Setup > Backlight Timeout. 2. Select the amount of time the backlight stays on, and press ENTER. GPS 72H Owner's Manual 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

GPS 72H Owner’s Manual
µ
Getting Started
Attaching the Wrist
Strap
1. Place the loop of the wrist strap
through the slot opening at the
bottom of the device.
2. Route the strap through the loop,
and pull it tight.
Acquiring GPS Satellite
Signals
1. Go outdoors to an open area,
away from tall buildings and trees.
2. Turn on the device. Acquiring
satellite signals can take a few
minutes.
The bars on the GPS Information
Page indicate the satellite strength.
When the bars are filled in, the GPS
72H has acquired satellite signals.
For more information, see
page 19
.
Adjusting the Backlight
1. Press and quickly release
.
2. Use the rocker to adjust the
brightness and contrast.
Br±ghtness
Contrast
To adjust the backlight time:
1. From the Main Menu, select
Setup
>
Backlight Timeout
.
2. Select the amount of time the
backlight stays on, and press
ENTER
.