Garmin 72H Owner's Manual - Page 41

Installing the Mount in a, Swivel Position, 5 mm starter holes at

Get Garmin 72H - Waterproof Handheld GPS PDF manuals and user guides
UPC - 753759098513
View all Garmin 72H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Marine Navigation 1. Remove the bail mount knob. Bail mount knob Bail mount NOTE: If securing the base using self-tapping screws, drill 1/16 in. (1.5 mm) starter holes at the locations you marked. Starter holes should be no deeper than half the screw length. Swivel base 4. Secure the bail mount with three bolts or screws. Do not overtighten. 2. Using the bail mount as a template, mark the location of the three pilot holes on the mounting surface. 5. Align the mounting hole on the cradle with the holes on the bail mount and secure it with the bail mount knob. Bail mount Installing the Mount in a Swivel Position 1. Remove the base knob. Set the base knob and the swivel base aside. 2. Remove the bail mount knob. Separate the bail mount from the cradle. 3. If you are securing the base with machine bolts, drill three 5/32 in. (4 mm) pilot holes. 3. Using the swivel base as a template, mark the location of the three holes. GPS 72H Owner's Manual 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
GPS 72H Owner’s Manual
³µ
Marine Navigation
1. Remove the bail mount knob.
Ba±l mount
knob
Ba±l mount
Sw±vel
base
2. Using the bail mount as a
template, mark the location of the
three pilot holes on the mounting
surface.
Ba±l mount
3. If you are securing the base with
machine bolts, drill three
5
/
32
in.
(4 mm) pilot holes.
NOTE
: If securing the base using
self-tapping screws, drill
1
/
16
in.
(1.5 mm) starter holes at the
locations you marked. Starter holes
should be no deeper than half the
screw length.
4. Secure the bail mount with
three bolts or screws. Do not
overtighten.
5. Align the mounting hole on the
cradle with the holes on the bail
mount and secure it with the bail
mount knob.
Installing the Mount in a
Swivel Position
1. Remove the base knob. Set the
base knob and the swivel base
aside.
2. Remove the bail mount knob.
Separate the bail mount from the
cradle.
3. Using the swivel base as a
template, mark the location of the
three holes.