Garmin Edge Explore Owners Manual - Page 13

5 Select an option. • Select another category to select more data fields. • Select . 6 Select or to change the layout. 7 Select . 8 Select an option. • Tap twice on a data field to change it. • Tap a data field, and then tap another data field to rearrange them. 9 Select . Editing a Data Screen 1 Select > Ride Settings. 2 Select Data Screens. 3 Select a data screen. 4 Select Layout and Data Fields. 5 Select a category, select data fields to add or remove, and select > . 6 Select or to change the layout. 7 Select . 8 Select an option. • Tap twice on a data field to change it. • Tap a data field, and tap another data field to rearrange them. 9 Select . Rearranging Data Screens 1 Select > Ride Settings. 2 Select Data Screens > . 3 Select a data screen. 4 Select or . 5 Select . Alerts You can use alerts to train toward specific time, distance, calorie, heart rate, and cadence goals. Setting Range Alerts If you have an optional heart rate monitor or cadence sensor, you can set up range alerts. A range alert notifies you when the device measurement is above or below a specified range of values. For example, you can set the device to alert you when your heart rate is below 90 BPM and over 160 BPM (Setting Your Heart Rate Zones, page 6). 1 Select > Ride Settings > Alerts. 2 Select Heart Rate Alert or Cadence Alert. 3 If necessary, turn on the alert. 4 Select the minimum and maximum values, or select zones. 5 If necessary, select . Each time you exceed or drop below the specified range, a message appears. The device also beeps if audible tones are turned on (Turning the Device Tones On and Off, page 11). Setting a Recurring Alert A recurring alert notifies you each time the device records a specified value or interval. For example, you can set the device to alert you every 30 minutes. 1 Select > Ride Settings. 2 Select Alerts. 3 Select an alert type. 4 Turn on the alert. 5 Enter a value. 6 Select . Each time you reach the alert value, a message appears. The device also beeps if audible tones are turned on (Turning the Device Tones On and Off, page 11). Auto Lap® Marking Laps by Position You can use the Auto Lap feature to mark the lap at a specific position automatically. This feature is helpful for comparing your performance over different parts of a ride (for example, a long climb or training sprints). During courses, you can use the By Position option to trigger laps at all of the lap positions saved in the course. 1 Select > Ride Settings. 2 Select Auto Features > Auto Lap > Auto Lap Trigger > By Position > Lap At. 3 Select an option: • Select Lap Press Only to trigger the lap counter each time you select and each time you pass any of those locations again. • Select Start and Lap to trigger the lap counter at the GPS location where you select and at any location during the ride where you select . • Select Mark and Lap to trigger the lap counter at a specific GPS location marked before the ride and at any location during the ride where you select . 4 If necessary, customize the lap data fields (Editing a Data Screen, page 9). Marking Laps by Distance You can use the Auto Lap feature to mark the lap at a specific distance automatically. This feature is helpful for comparing your performance over different parts of a ride (for example, every 10 miles or 40 kilometers). 1 Select > Ride Settings. 2 Select Auto Features > Auto Lap > Auto Lap Trigger > By Distance > Lap At. 3 Enter a value. 4 If necessary, customize the lap data fields (Editing a Data Screen, page 9). Marking Laps by Time You can use the Auto Lap feature to mark the lap at a specific time automatically. This feature is helpful for comparing your performance over different parts of a ride (for example, every 20 minutes). 1 Select > Ride Settings. 2 Select Auto Features > Auto Lap > Auto Lap Trigger > By Time > Lap At. 3 Enter a value. 4 If necessary, customize the lap data fields (Editing a Data Screen, page 9). Using Auto Sleep You can use the Auto Sleep feature to automatically enter sleep mode after 5 minutes of inactivity. During sleep mode, the screen is turned off and the ANT+ sensors, Bluetooth, and GPS are disconnected. 1 Select > Ride Settings. 2 Select Auto Features > Auto Sleep. Using Auto Pause You can use the Auto Pause® feature to pause the timer automatically when you stop moving or when your speed drops below a specified value. This feature is helpful if your ride includes stop lights or other places where you need to slow down or stop. Customizing Your Device 9