Garmin G2000 Pilots Guide - Page 153
NAV Receiver Tuning, Selecting/deselecting a navigation radio for monitoring, Audio & Radios
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS Audio and CNS NAV radios are selected for listening by pressing the corresponding buttons on the Touchscreen Controller. Touching the NAV1 or NAV2 Button selects and deselects the navigation radio source. Selected audio can be heard over the headset and the speaker (if selected). All radios can be selected individually or simultaneously. NAV1 Button (selected for monitoring) NAV2 Button (not selected) NAV1 Active Frequency/ID NAV1 Standby Frequency NAV2 Active Frequency/ID NAV2 Standby Frequency Figure 4-18 Selecting a NAV Radio for Monitoring Selecting/deselecting a navigation radio for monitoring: 1) Touch the Audio & Radios Button to display the Audio & Radios Screen. 2) If selecting for the Copilot, touch the Copilot Tab. (If necessary, also touch the Sync to Pilot Button to disable synchronizing selections to the pilot.) 3) Touch the NAV1 or NAV2 Button on the Audio & Radios Screen to select/deselect the radio for monitoring. NAV Receiver Tuning The NAV frequencies are tuned from the Touchscreen Controller and the GDU Controller. AUDIO & CNS FLIGHT MANAGEMENT HAZARD AVOIDANCE AFCS ADDITIONAL FEATURES APPENDICES NAV selected for tuning (light blue border) NAV1 Volume Slider NAV2 Frequency Button Knob function labels Figure 4-19 Audio & Radios Screen - NAV Frequency Tuning 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 139 INDEX