Garmin GHP 10 Marine Autopilot System GHC 10 Quick Start Manual - Page 12

Orbit The Orbit GPS pattern steers the boat in a continuous circle around the active waypoint. The size of the circle is defined by your distance from the active waypoint when you begin the Orbit GPS pattern. There are no settings to adjust. Cloverleaf The Cloverleaf GPS pattern steers the boat to repeatedly pass over an active waypoint. When you begin the Cloverleaf pattern, the autopilot drives the boat toward the active waypoint and then begins the Cloverleaf GPS pattern when appropriate. The default settings create a cloverleaf pattern that turns the boat at a range of 300 m from the active waypoint. 10 Search The Search GPS pattern steers the boat in increasingly larger circles (a spiral pattern) outward from the active waypoint. When you begin the Search GPS pattern, the autopilot drives the boat to the active waypoint and then begins the pattern. The default setting spaces the circles 20 m apart. Route To The autopilot steers the boat according to a route defined on your Garmin chartplotter or other compatible GPS device. To follow a GPS route: 1. On your chartplotter or GPS device, create a route and begin navigating the route according to the directions provided with the chartplotter or the GPS device. 2. On the GHC 10, from the Heading screen, select Menu > GPS Steering > Route To. GHC 10 Quick Start Manual