Garmin GHP 10 Marine Autopilot System GHC 10 Quick Start Manual - Page 8
Manually Adjusting the Heading, Opening the Menu, depends on the current state of
View all Garmin GHP 10 Marine Autopilot System manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Manually Adjusting the Heading When the autopilot is engaged, use the left ( ) and right ( ) soft keys to manually adjust the heading. When you manually adjust the heading, the heading dial on the Heading screen displays your actual heading while the autopilot steers the boat to the intended heading. The intended heading is indicated by a yellow marker on the heading dial and is displayed numerically in the center of the Heading screen. Heading dial Intended heading Actual heading Manually Adjusting the Heading Note: If the autopilot is steering a pattern (page 7), manually adjusting the heading cancels the pattern. Opening the Menu From the Heading screen, the center soft key opens the menu where you can start pattern steering, customize the GHC 10, and configure the autopilot. When you select Menu from the Heading screen, the first option listed depends on the current state of the autopilot: • If you have the helm or if the autopilot is maintaining the heading, the first menu option becomes a shortcut to re-engage the most recently used pattern. • If the autopilot is steering a pattern, the first menu option becomes a shortcut to adjust the settings for the current pattern. GHC 10 Quick Start Manual