Garmin GHP 10 Marine Autopilot System GHC 10 Quick Start Manual - Page 15

Configuring a GHC 10 Remote Control To configure an optional remote control on the GHC 10, from the Heading screen, select Menu > Setup > Remote. You can connect one optional GHC 10 remote control to a GHC 10. Search for Remote-allow the GHC 10 to search for an optional GHC 10 remote control. Disconnect Remote-(only available when a remote control is connected) disconnect a connected remote control. Button (1-3) Action-define the functions of the three dynamic buttons on a connected remote control. Choose from the options listed in the Remote Button Action Table. GHC 10 Quick Start Manual Button Function Zigzag Circles U-Turn Route To Orbit Cloverleaf Search Transmission Direction Page Reference Page 8 Page 8 Page 8 Page 10 Page 10 Page 10 Page 10 Page 4 Remote Button Action Table Notes: • If you assign Transmission Direction to a button on the remote control, the autopilot must be in standby mode to change the direction (forward or reverse). • If you assign a pattern to a button on the remote control, remember that you are responsible for the safe operation of your boat. Do not begin a pattern until you are certain that the water is clear of obstacles. 13