Garmin GHP 20 Marine Autopilot System for Viking Owner's Manual - Page 10

Powerboat Autopilot Operation Circles Pattern The circles pattern steers the boat in a continuous circle, in a specified direction, and at a specified time interval. Setting Up the Circles Pattern You can adjust the time the autopilot takes to complete the circle. The default value creates a circle that takes 5 minutes to complete. 1. From the heading screen, select Menu > Pattern Steering > Circles > Time. 2. Select or to set the time. 3. Select Done. Following the Circles Pattern 1. From the heading screen, select Menu > Pattern Steering > Circles. 2. Select Engage. 3. Select an option: • Select to begin a clockwise turn. • Select to begin a counter-clockwise turn. The autopilot follows the circles pattern, and the heading screen shows the time of the circles pattern ➀. ➀ The autopilot positions the boat so that the circle pattern is centered on the location at which you engage the pattern. TIP: To quickly resume a pattern after you make a heading adjustment with the helm or the soft keys (page 3), select the center soft key twice. 6 GHC 10 Owner's Manual