Garmin GHP Compact Reactor Hydraulic Autopilot with GHC 20 Pack Installation I - Page 12

Error and Warning Messages, Registering Your Device, Contacting Garmin Product Support

Page 12 highlights

Type Sentence grme gsa gsv rmc bod bwc dtm gll rmb vhw mwv xte Error and Warning Messages Error Message Cause Autopilot Action ECU Voltage is Low The pump supply voltage • Alarm sounds has fallen below 10 Vdc for for 5 seconds longer than 6 seconds. • Continues in normal operation Autopilot is not The autopilot is no longer receiving navigation receiving valid navigation data. Autopilot placed data while performing a in Heading Hold. Route To maneuver. This message also appears if navigation is stopped on a chartplotter before the autopilot is disengaged. • Alarm sounds for 5 seconds • Autopilot transitions to heading hold Connection with Autopilot Lost The helm control has lost N/A connection with the CCU. Lost Wind Data (sailboat only) The autopilot is no longer receiving valid wind data. • Alarm sounds for 5 seconds • Autopilot transitions to heading hold Error: Lost Communication Between ECU and CCU (when the autopilot is engaged) Communication between • The helm control the CCU and the pump has beeps, and timed out. autopilot transitions to standby. Registering Your Device Help us better support you by completing our online registration today. • Go to www.my.garmin.com. • Keep the original sales receipt, or a photocopy, in a safe place. Contacting Garmin Product Support • Go to www.garmin.com/support for in-country support information. • In the USA, call 913-397-8200 or 1-800-800-1020. • In the UK, call 0808 238 0000. • In Europe, call +44 (0) 870 850 1241. Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GHP™, GHC™, Reactor™, and Shadow Drive™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. NMEA®, NMEA 2000®, and the NMEA 2000 logo are trademarks of the National Marine Electronics Association. Uflex® and MasterDrive™ are trademarks of the UltraFlex Group. Teflon® is a trademark of DuPont™. © 2015 Garmin Ltd. or its subsidiaries www.garmin.com/support

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

Type
Sentence
grme
gsa
gsv
rmc
bod
bwc
dtm
gll
rmb
vhw
mwv
xte
Error and Warning Messages
Error Message
Cause
Autopilot Action
ECU Voltage is Low
The pump supply voltage
has fallen below 10 Vdc for
longer than 6 seconds.
Alarm sounds
for 5 seconds
Continues in
normal
operation
Autopilot is not
receiving navigation
data. Autopilot placed
in Heading Hold.
The autopilot is no longer
receiving valid navigation
data while performing a
Route To maneuver.
This message also
appears if navigation is
stopped on a chartplotter
before the autopilot is
disengaged.
Alarm sounds
for 5 seconds
Autopilot
transitions to
heading hold
Connection with
Autopilot Lost
The helm control has lost
connection with the CCU.
N/A
Lost Wind Data
(sailboat only)
The autopilot is no longer
receiving valid wind data.
Alarm sounds
for 5 seconds
Autopilot
transitions to
heading hold
Error: Lost
Communication
Between ECU and
CCU (when the
autopilot is engaged)
Communication between
the CCU and the pump has
timed out.
The helm control
beeps, and
autopilot
transitions to
standby.
Registering Your Device
Help us better support you by completing our online registration
today.
Go to
www.my.garmin.com
.
Keep the original sales receipt, or a photocopy, in a safe
place.
Contacting Garmin Product Support
Go to
www.garmin.com/support
for in-country support
information.
In the USA, call 913-397-8200 or 1-800-800-1020.
In the UK, call 0808 238 0000.
In Europe, call +44 (0) 870 850 1241.
Garmin
®
and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered
in the USA and other countries. GHP
, GHC
, Reactor
, and Shadow Drive
are
trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without
the express permission of Garmin.
NMEA
®
, NMEA 2000
®
, and the NMEA 2000 logo are trademarks of the National Marine
Electronics Association. Uflex
®
and MasterDrive
are trademarks of the UltraFlex Group.
Teflon
®
is a trademark of DuPont
.
© 2015 Garmin Ltd. or its subsidiaries
www.garmin.com/support