Garmin SL40 SL 40 User Guide - Page 13

Removing a Frequency from User Memory You may edit the contents of User memory to remove its stored frequencies when you want to make a change or you receive a "MEM Full" message. 1. Press RCL. Turn the Large knob to the User (MEM) frequencies. 2. Press MEM. Turn Large knob to show "Remove." 3. Turn the Small knob to choose the frequency to Remove. 4. Press MEM to remove the frequency. Or, turn the Large knob to "Abort" and press MEM to cancel and leave memory as it was. Replacing a Frequency from User Memory You may edit the contents of User memory to replace its stored frequencies when you want to make a change or you receive a "MEM Full" message. 1. Select the desired new frequency with the Large and Small knobs. 2. Press RCL. Turn the Large knob to the User (MEM) frequencies. 3. Press MEM. Turn Large knob to show "Replace." 4. Turn the Small knob to choose the frequency to Replace. 5. Press MEM to replace the displayed stored frequency with the current Standby frequency. Or, turn the Large knob to "Abort" and press MEM to cancel and leave memory as it was. Assigning an ID to a User Frequency Frequencies in User (MEM) memory can be given an alphanumeric identifier for your ease of use. 1. Press RCL. Turn the Large knob to the User (MEM) frequencies. 2. Press MEM and hold it for about two seconds. "Assign ID" and the frequency to be given an ID will be displayed. 3. Turn the Small knob to select the desired User frequency. 4. Press MEM. Six underscored spaces will appear and the first one will flash. 5. Turn the Small knob to select characters. Turn the Large knob to move to another space. Continue to select the desired characters. Detailed Operation Removing, Replacing, & ID User Frequencies Remove 121.50 Removing a Frequency Replace 121.50 Replacing a Frequency Assign ID 124.55 Assign ID ATIS__ Done ATIS__ Assigning an ID to a User Frequency 7