Garmin aera 510 Pilot's Guide - Page 106

Overview GPS Navigation Additional Features Hazard Avoidance Flight Planning Hazard Avoidance 4.2 Terrain Warning: Do not use Terrain information for primary terrain avoidance. Terrain information is intended only to enhance situational awareness. NOTE: Terrain data is not displayed when the aircraft latitude is greater than 75° North or 60° South. NOTE: Terrain depicted in the Profile View is always "ahead" of the aircraft, and will change as ground track changes. The Terrain function displays altitudes of terrain and obstructions relative to the aircraft position and altitude with reference to a database that may contain inaccuracies. Terrain and obstructions are shown only if they are in the database. Terrain and obstacle information should be used as an aid to situational awareness. They should never be used to navigate or maneuver around terrain. Note that all obstructions may not be available in the terrain and obstacle database. No terrain and obstacle information is shown without a valid 3-D GPS position. The aera GPS receiver provides the horizontal position and altitude of the aircraft. Aircraft GPS altitude is derived from satellite position. GPS altitude is then converted to a mean sea level (MSL)-based altitude (GPS-MSL altitude) and is used to determine terrain and obstacle proximity. GPS-MSL altitude accuracy is affected by satellite geometry, but is not subject to variations in pressure and temperature that normally affect pressure altitude sensors. GPS-MSL altitude does not require local altimeter settings to determine MSL altitude. It is a widely-used MSL altitude source. Appendices Index 94 Garmin aera 500 Series Pilot's Guide 190-01117-02 Rev. A