Gateway 960 Installing Your Gateway 960 or 980 Server into a Rackmount Cabinet - Page 21
To attach the rail assemblies to the rackmount cabinet brackets
View all Gateway 960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installing your server into a rackmount cabinet Rackmount kit parts you need to complete this task: 2 rail assemblies (the inner rails have been removed and attached to the server) 2 rackmount cabinet bracket sets 10 M4 screws #8-32 × 8.0mm 10 M4 nuts To attach the rail assemblies to the rackmount cabinet brackets: 1 Lay a front and back rackmount cabinet bracket on a flat work surface as shown. 2 Place the rail assembly inside the brackets. www.gateway.com 17
17
Installing your server into a rackmount cabinet
www.gateway.com
Rackmount kit parts you need to complete this task:
To attach the rail assemblies to the rackmount cabinet brackets:
1
Lay a front and back rackmount cabinet bracket on a flat work surface as
shown.
2
Place the rail assembly inside the brackets.
2 rail assemblies (the inner rails have been
removed and attached to the server)
10 M4 screws #8-32 × 8.0mm
10 M4 nuts
2 rackmount cabinet bracket sets