Gateway 960 Installing Your Gateway 960 or 980 Server into a Rackmount Cabinet - Page 26
Tips & Tricks
View all Gateway 960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installing Your Gateway Server into a Rackmount Cabinet 3 Push the server evenly into the cabinet until it is pushed completely into the cabinet. If the rails lock when you push the server in, slide the white release latches toward the front of the server and push again. Tips & Tricks The server should move smoothly, without binding, after the first installation. If the server does not slide smoothly, make sure that all rails and brackets are aligned correctly. If the server jams, slide the white release latch toward the front of the server and pull the server to the fully extended position, then push it closed again. Tips & Tricks When you press the white release latches, you may have to slide the server out slightly before pushing it back into the locked position. Release latch 22 www.gateway.com