Gateway GT5012 8510755 - Media Center User Guide - Page 8

Setting up Media Center hardware Now that you're familiar with the components, connect them to your Media Center computer. Set up the computer • Before setting up the Media Center hardware, make sure that you have: • Set up your computer • Set up your display device • Set up the sound system (optional) If you use a TV as the Media Center display device instead of a display device provided by Gateway, see Connecting a TV on page 11. Install the remote control batteries • Insert two AA batteries into the remote control. Match the + and - on the batteries with the + and - symbols inside the battery compartment. 8 Connect the remote sensor 1 Connect the remote sensor to any USB port on your computer. If your remote sensor does not have the USB cable already attached to it, attach the USB cable to the USB port on the back of the sensor. Note: Your computer's ports may vary. 2 Position the remote sensor so the remote control has a direct, unobstructed view of the sensor. The remote control has a range of 23 feet and can be used up to about 22° from the centerline of the sensor.